Additional Information
| Code | 16/320 |
|---|---|
| Make | Makita |
| Model | SP6000 |
| Power Source | 110V |
| Blade(s) | 165mm (Diameter) |
| Capacity | 56mm (90°) / 40mm (45°) / 38mm (48°) |
| Speed | 2000 - 5200rpm (No Load) |
Product Description
This Matika Plunge Cut Saw comes with TCT blade, Hex Wrench and Guide Rule.
* Tip-Resistant Design
Sliding the lever prevents this tool from falling down towards blade case.
* Depth Stopper for Splinter-free Cutting
Enables to easily cut a preliminary groove at a depth of 2mm (1/16") for splinter-free cuts.
* Bevel Cut
Bevel Range: -1 to 48 degrees.
Precision Bevel Cut
The position of cutting line is always the same regardless of bevel angle in cutting with Guide Rail attached.
* Precision Bevel Cut
Positive Stopper.
The position of cutting line is always the same
regardless of bevel angle in cutting with Guide Rail attached.
*Close-to-Wall Cutting
Only 18mm (11/16") away from wall at minimum.
* Guide Rule (Sub Base) can be installed.
Guide Rule can be used as Sub Base by turning up side down.
Sliding the lever prevents this tool from falling down towards blade case.
* Depth Stopper for Splinter-free Cutting
Enables to easily cut a preliminary groove at a depth of 2mm (1/16") for splinter-free cuts.
* Bevel Cut
Bevel Range: -1 to 48 degrees.
Precision Bevel Cut
The position of cutting line is always the same regardless of bevel angle in cutting with Guide Rail attached.
* Precision Bevel Cut
Positive Stopper.
The position of cutting line is always the same
regardless of bevel angle in cutting with Guide Rail attached.
*Close-to-Wall Cutting
Only 18mm (11/16") away from wall at minimum.
* Guide Rule (Sub Base) can be installed.
Guide Rule can be used as Sub Base by turning up side down.
